Flood Detector reduces water damage prevents mould wirelessly alerts
An early warning of accidental flooding in the home.
Adi Flood Detector raises an alert when it detects a flood, thereby reducing the potential for slipping and water damage to property.
Features
- Dual function – The Adi Flood Detector indicates the unwanted presence of water highlighting a potential risk and features a Help button that can be used to summon assistance.
- Easy installation – Adi Flood Detector can be installed with foam-back tape or screws, no wiring is required.
- Low battery reporting – When Adi’s battery reaches 20% of its capacity, Adi automatically sends a report so that the battery can be replaced ensuring continuous operation.
Who is it for?
Adi Flood Detector enhances the well-being of people in a home setting who may forget to turn the water off when running a bath or filling the sink. It provides an early indication that someone may need support in cleaning up a flood event to prevent damage to the property and prevent the growth of mould.
How it works
The Adi Flood Detector can be placed on the floor under a sink, near a bath or by a toilet to detect early signs of flooding. The flood sensor connects to Adi through a 3.5 mm socket and is positioned so the sensor probes become immersed in water when flooding occurs.
How it reports
Alert
When the flood sensor probes have detected water for 4 seconds, Adi signals to the SEVEN base unit. The 4-second detection time ensures that the flood is genuine and prevents false alarms due to small splashes on the flood sensor
Alert Received
SEVEN receives the flood alert from Adi then sends a 'Flood' signal for assistance
Restore
When water has not been detected for 10 seconds, Adi signals to the SEVEN base unit which then sends a ‘Restore’ signal
Button Press
When pressed, the button on the Adi case will either send the Alert type i.e. activate a Help alert. The Base unit is designed to be able to behave differently depending on the signal received
Technical Details
Adi PCB in case, battery, 3.5 mm audio socket, foam pad, flood sensor
Adi: length 59 mm, width 38 mm, height 18 mm.
Flood detector: length 30 mm, width 20 mm, height 9 mm, cable length 1 metre
33 grams, excluding flood detector
0°C to 50°C (battery life may differ if not at 20°C)
- 300 metres+ typical in open air when paired with a Chiptech base unit, when at home.
- Frequency: Australia 916MHz, New Zealand/European 869MHz.
- Chiptech Proprietary Protocol Version 2
Adi is packaged in recycled cardboard.
Lithium coin cell. 950 mAh with a CR2477N
The battery is replaceable by an authorised person either onsite or during servicing. The estimated life is five years based on five activations per day and seven-hourly test transmissions to the base unit.
Compatible Products
SEVEN
SEVEN - X